Design [Udemy] Circuit Design, Simulation and PCB Fabrication Bundle

Circuit-Design-Simulation-and-PCB-Fabrication-Bundle.jpg

DESCRIPTION:

What you'll learn:

  • Make PCB with Zero Experience in Electronics
  • Learn basic to advance PCB design
  • Draw a schematic of your circuit in few simple steps
  • Create your own custom Printed Circuit Board (PCB).
  • Connect a Breadboard of your circuit in few simple steps
  • Auto Route to speed up the routing process
  • Make A PCB in the shortest possible time
  • Route Printed Circuit Board (PCB)
  • Prototype your kickstarter idea
  • Get a job in PCB design
  • Master Designing electronic circuits
  • Simulate and test your circuit before actually making it
  • Make a professional Printed Circuit electronic board PCB for your circuit.
  • Track you errors in seconds
  • Use Proteus Software which is one of the best electronic software ever
  • Simulate and design 3D Electronic Circuits
  • Program 3D PIC microcontroller using Flow-charting
  • Simulate 3D PCB
  • Simulate 3D mechanisms
  • Simulate 3D Measurements
  • Choose the right soldering Iron
  • Choose the right tools you need to have to keep yourself safe while soldering and solder the right way
  • Choose the best solder out there, and why it is the best
  • Clean your soldering Iron
  • Change the soldering Iron tip head
  • Extend soldering Iron life span
  • Get your own Soldering tools that are right for you
  • Solder Correctly following The right steps to an excellent soldering
  • Set the right heat, solder and tools to be a soldering professional
  • Differentiate between good soldering and bad soldering with real life examples
  • Test your codes and schematics for PIC Microcontroller without the risk of burning your board. No More bad connections or wrong codes.
  • Do realtime Simulation of PIC Microcontroller using development boards with integrated debugger or using any code that you have in hand.
  • Save money, since this software is for FREE, you won’t have to pay anything, you don’t even have to buy any components before testing your code, write the code, upload it to the software, test it then you are good to go.
  • Simulate PIC16F84, PIC16F628 or PIC16F648, PIC16F777, PIC16F877A, PIC18F452, PIC18F4520, PIC18F4550 or PIC18F4620, ATMEGA328 Microcontrollers
  • Save Circuit design and Simulation Time, since you will be able to simulate using a real-life board that is designed to meet all your needs
  • Debug and track signals and data memory in Real-time
  • Simulate Labtools development board McLab1 Board
  • Simulate Labtools development board McLab2 Board
  • Simulate Microgenius development board PICGenios Board
  • Simulate Arduino Uno development board
  • Write codes and test them without having a PIC Microcontroller
  • Test Codes without having a real physical electronic components
  • Make your Own Training Kit
  • Design and Manufacture any PCB that comes in your mind
  • Design any Microcontroller module
  • Simulate Arduino UNO Boards
  • Simulate Arduino Mega Boards
  • Simulate Arduino nano Boards
  • Write codes and test them without having an Arduino Board
  • Test Codes without having a real physical an Arduino Board
  • Create and design a custom Arduino Nano in Altium Designer
  • Draw schematic of an Arduino Nano and wire components
  • Create your own custom components and component library
  • Compile design detect and eliminate design errors
  • Define board shape and size
  • Auto route to speed up the routing process
  • Route Printed Circuit Board (PCB)
  • Eliminate errors and reduce manufacturing board iterations by Using design rule checker
  • Make your own Pinguino (PIC Microcontroller Based Arduino) Board
  • Bootload Your Pinguino (PIC Microcontroller Based Arduino)
  • Know what is the actual brain of Pinguino (PIC Microcontroller Based Arduino)
Requirements:
  • A Computer or Laptop with any operating system
  • The Software that will be used to create the PCB Provided in the first Section (FREE)
  • Basic experience in Electronics
  • No materials required if you only wish to view the course
  • Have A basic Experience in browsing the internet
  • Time, Dedication and Patience to learn and implement new knowledge.
This Bundle Consists of 136 Lecture with more than 12.5 hours of HD Video Content and supplementary material in which we cover more than four different software used to design, simulate and fabricate circuits, I can assure you that after this course you will be a professional in Circuit design and fabrication.

You will get the chance to learn:
  1. PCB Design and Fabrication using Frtizing Software
  2. PCB Design: Master Designing Printed Circuit Board using Proteus Software
  3. PCB Design: Make Arduino Nano using Altium Designer
  4. 3D Simulation: Microcontrollers, Electronics, Mechanism, PCB using Yenka Software
  5. Soldering Electronic Components Like A Professional
  6. Microcontroller Circuit Design and Simulation
  7. Arduino Circuit Design and Simulation
Let's talk in more details about each Section

PCB Design and Fabrication For Everyone

Learn Printed Circuit Board (PCB) design from Scratch With Zero Experience in Electronics, No Effort and a Free Software

>>> This course is a first of its kind in which you will learn from start to finish on how to design your own Printed Circuit Board (PCB) with Zero Experience in Electronics and Circuit Design, YES, you did hear me, No experience is required at all. <<<

Welcome to this course


This course will help you to gain PCB design skills which will help you to get started freelancing or to get a job in PCB design with a Free Software being one of the top PCB design tools used around the world, so you won't have to pay anything for the software and it has tons of library for almost every component in electronics industry.

Printed Circuit Board design is very interesting for any electronics geek, microcontroller programmers anyone wishing to build his own PCB by themselves. It is very simple and easy to understand for beginners.

No Previous Experience + Free Software + Time Saving Techniques = Perfect PCB Design

This is available for your in this course + Bonuses and additional Material + PCB Design Software.

PCB Design: Master Designing Printed Circuit Board

A-Z Guide to designing, testing and Manufacturing any electronic circuit, using the most popular electronic software.

>>> A-Z Guide to designing, drawing and testing any electronic circuit that comes in hand, using one of the most popular software in the electronics industry, after this course you will be a master at making your own electric circuit board. <<<

Welcome to this course:

  • You will become professional in making your own electronics circuits, you will even be able to master mass producing any electronics circuit that you find useful.
  • Video and Text lectures are included along with the software package that will be used in this course.
  • The course begins with introducing electronic circuit design then lessons for beginners to allow you become an expert, then at the end we will make a more advanced circuit and prepare it for mass production like professional.
  • All what you need for this course is your laptop and headphones.
  • This course is open for comments and suggestions.
  • Why you should take this course, well, because you will learn by doing not by listening and you will become an expert in making your own circuits.
3D Simulation: Microcontrollers, Electronics, Mechanism, PCB

Enter the world of 3D simulation and have fun learning and teaching Microcontroller Electronics, Mechanical and PCB

>>> 3D simulators nowadays are covering all aspects of the electronic design process, in 3D. In this course you will get the chance to explore the wonders of 3D simulation of a limitless range of circuit boards, a 2D circuit design tools, and also PIC microcontroller simulation, testing and programming. <<<

Welcome to this course.

You will get the chance to learn:

  • 3D Electronic simulation and design
  • PIC microcontroller programming
  • Flowcharting
  • 3D PCB simulation
  • 3D mechanisms
  • Measurement
What You Will learn in This Course:
  • What is Crocodile Technology
  • Why it is helpful to simulate and design in 3D
  • Download and Install the Software
  • User Interface Introduction
  • Design and Simulate ON/OFF Switches Circuits
  • Design and Simulate Microcontroller Systems
  • Flowcharting.
  • Design and Simulate Simple Led On/Off Circuits
  • Design and Simulate Simple Led Flasher Circuits
  • Design and Simulate Simple 7 Segment Circuits
  • Design and Simulate Counter using 7 Segment Circuits
  • Design and Simulate Motors
This will be a journey of a life time for everyone looking for a new vision in Engineering Simulation, easy to use and really helpful software will be introduced.

How to Solder Electronic Components Like A Professional

In this Course you will learn how to Master Soldering in no Time

>>> In this Course you will learn how to Master Soldering in no Time <<<

Welcome to this course.

1.5 Hour of HD Content
| 1 Hour of Practical Videos | 1500 Students

STOP Wasting Time, Money and Effort on Bad Soldered boards, Start Solder correctly to have a long lasting Fully functional Board.

Ever Wondered Which Soldering Iron is right for you?

Did you ask Yourself why My soldering doesn't look or feel like a professionally soldered board like you see in most online videos and images or even in boards that you purchase?


This Course Have all the answers for you

You will learn how to master soldering, and use the right tools for the job

You can count on these results:
  1. Learn how to choose the right soldering Iron
  2. Learn how to change the soldering Iron tip head
  3. Learn what is the best solder out there, and why it is the best
  4. Learn how to clean your soldering Iron
  5. Learn how to extend soldering Iron life span
  6. Learn what are the right tools you need to have to keep yourself safe while soldering and solder the right way
  7. Learn the difference between good soldering and bad soldering with real life examples
Basic soldering is a skill that's easy to learn and not hard to master.

It just takes practice!

There is a huge range of soldered situations out there, from tiny chip resistors on circuit boards to large UHF connectors.

There is also a large variety of irons, tips and solder to choose from, and it certainly does help to have the right tool for the job.

Good luck, and remember....

Good soldering takes practice!

Warning :You are working with HOT liquid metal, it is a matter of time before you will get burned.

Be careful!

Contents that will be introduced in this Course:
  1. Soldering Tools
  2. Soldering Accessories
  3. Step 1: Preparation
  4. Step 2: Tinning
  5. Step 3: Soldering
  6. Cleaning
  7. Tips and Tricks
PIC Microcontroller Simulation: Unleash the power of Code

Stop Wasting Time Start working with different PIC Microcontroller and start unleashing the power of code in Simulation

Start your PIC Microcontroller Simulation Journey by working with different PICMicrocontroller without buying them. Unleash the power of code in Simulation

>> PIC Microcontroller is an easy-to-use Microcontroller. Sensing the environment by receiving inputs from many sensors. PIC Microcontroller affects its surroundings by controlling lights, motors, and a number of other accessories. It's intended for anyone making interactive hardware projects and in this course, we will make it easy for you to Code and Simulate PIC Microcontroller and Start Testing Your Codes Freely. <<<

Welcome to PIC Microcontroller Simulation Course.

In this course, you will learn how to real-time Simulation of PIC Microcontroller using different Boards and Schematics in A Professional Simulation Environment. It will help you unleash your full coding potential without buying any of the Training boards, you just need to write your code and upload the hex file to the Simulation Software.

This course will help you test your codes and schematics for PIC Microcontroller without the risk of burning your board. No More bad connections or wrong codes.

Be sure that you will learn a lot from this course and it will help you advance your Microcontroller Career. As a result, you will save Money and Time when simulating Microcontrollers

Contents and Overview This course is designed for anyone interested in learning PIC Microcontroller and Simulate different type of it with different components without buying any of them and for FREE. You don't need to have any previous experience, and all you need is a computer. The Simulation Software is FREE

Why You Should Take This Course?

  • Save Circuit design and Simulation Time, since you will be able to simulate using a real-life board that is designed to meet all your needs
  • You don't need to hock or connect any wire, write the code and uploads it to the free simulation software.
  • Save money, since this software is for FREE, you won’t have to pay anything, you don’t even have to buy any components before testing your code, write the code, upload it to the software, test it then you are good to go.
  • Real-time debugging and tracking of signals and data memory.
  • Proteus Simulation software cost around 450$ and another cost up to 1000$. The software that I will teach you how to use it for free.
  • You won’t have to pay anything, download and install then you are good to go. Start using it in no time.
PIC Microcontrollers that you will be able to Simulate.

PIC16F84, PIC16F628 or PIC16F648, PIC16F777, PIC16F877A, PIC18F452, PIC18F4520, PIC18F4550 or PIC18F4620, ATMEGA328

Boards that you will be able to Simulate

Labtools development board McLab1, Labtools development board McLab2, Microgenius development board PICGenios, Arduino Uno development board

PIC Microcontrollers: Design & Manufacture Your Training Kit

A-Z Guide that allows you to make a factory quality training kits that meet your exact needs.

>>> A-Z Guide to designing, drawing and testing different training kit circuit that comes in hand, using one of the most popular software in the electronics industry, after this course, you will be a master at making PIC Microcontrollers Training Kit instead of buying it. <<<

Welcome to Make PIC Microcontrollers Training Kit course.

There are many reasons Why You Should Take this course:

  • Commercial Training Kits have many functions that you might never use and add an additional cost which makes the overall cost of a kit very high.
  • There is no chance that you will find a kit that matches your exact needs.
  • Making things with your own hands will give you a very good understanding of how electronic boards are made and will help you be a professional in making permanent Printed circuit boards.
  • You can easily adjust the items of the kit and make many copies at your home at a very low price.
  • You will get to practice playing with electronics.
So Make PIC Microcontrollers Training Kit course will offer you:
  • A-Z Guide to designing, drawing and testing different training kit circuit that comes in hand, using one of the most popular software in the electronics industry, after this course, you will be a master at making your own training kit instead of buying it.
  • You will become professional in making your own circuits, you will even be able to master mass producing an electronic module for Microcontroller that you find useful.
  • Video and Text lectures are included along with the software package that will be used in this course.
  • All that you need for this course is your laptop and headphones.
  • This course is open for comments and suggestions.
  • Another reason Why you should take this course, well, because you will learn by doing not by listening and you will become an expert in making your own circuits.
Design and Simulate Arduino Boards and Test Your Code

Start working with different Arduino boards without buying them and start unleashing the power of code in Simulation

>>> The Arduino is an open-source electronics platform based on easy-to-use hardware and software. Sensing the environment by receiving inputs from many sensors, Arduino affects its surroundings by controlling lights, motors, and a number of other accessories. It's intended for anyone making interactive hardware projects and in this course, we will make it easy for you to Design and Simulate Arduino Boards and Start Testing Your Codes Freely. <<<

Who this course is for:

  • PCB Designers
  • Electronics Geeks
  • Circuits Creators
  • Everyone who's interested in Electronics
  • School Students who want's to learn more about electronics in simple ways
  • Teachers who are looking for ways to make learning more fun and interactive
  • Anyone Interested in Learning The right way to solder
  • PIC Microcontroller Geeks
  • Anyone looking to learn PIC Microcontroller but don't want to buy the Microcontrollers or Electronic Components
  • Anyone looking to learn PIC Microcontroller without spending any money buying Programming and Simulation Software
  • Anyone starting their journey in PIC Microcontroller
  • Anyone looking for a free software to Simulate PIC Microcontroller
  • Anyone looking to unleash the power of coding using Simulation
  • Newbies looking to enhanse there Circuit design skills and make great PCBs and training kits in not time
  • Arduino Geeks
  • Anyone looking to learn Arduino but don't want to buy the boards
  • Anyone looking to learn Arduino without spending any money buying different boards
  • Anyone starting their journey in Microcontrollers
  • Anyone who Want to get a job in PCB design
  • Anyone who Want to learn Altium Designer in the shortest possible time.
  • Anyone who Want to get started creating cool gadgets
  • Anyone Interested in Learning New Things about Pinguino (PIC Microcontroller Based Arduino)
  • Anyone Interested in Knowing how Pinguino (PIC Microcontroller Based Arduino) board actually works
  • Anyone Interested in Knowing what each component inside Pinguino (PIC Microcontroller Based Arduino) does
  • Circuit Designers
SALES PAGE:
DOWNLOAD:
 

Обратите внимание

Назад
Сверху